banner
Home » News » Content
Product Categories

BPEF MSDS

- Aug 31, 2018 -

SAFETY DATA SHEET

Section 1. Identification

Product name:                          Bisphenoxyethanolfluorene(BPEF)

Company:                                  Xiaoyi City Jinjing Chemical Co., Ltd

                                                    Xi Xie Bao Village,Xiabao Town,Xiaoyi City,

                                                    Shanxi Province,China 032300

Telephone:                                 0086-358-7663760

Fax:                                             0086-358-7663770

In case of emergency call:         0086-13593390547

                                                      (24 hours/day, 7days/week)

 

Section 2. Composition/information on ingredients

 

Chemical name

Abbreviated name

CAS No.

EINECS No.

Concentration

Bisphenoxyethanolfluorene

BPEF

117344-32-8

none

100%

 

Section 3. Hazards identification

Primary routs of entry: Entry from eyes, skin inhalation

Health hazards: Causing skin irritation and serious eye irritation

Environmental hazards: None

Explosion hazard: None

 

Section 4. First aid measures

Skin contact: Wash off with soap and plenty of water. Consult a physician.

Eye contact: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

Inhalation: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

Injection: Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

 

Section 5. Fire-fighting measures

Extinguishing media: Suitable extinguishing media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Specific hazards arising from the chemical: no data available

Special protective actions for fire-fighters: Wear self-contained breathing apparatus for firefighting if necessary.

 

Section 6. Accidental release measures

Personal precautions, protective equipment and emergency procedures:

Use personal protective equipment.

Avoid dust formation.

Avoid breathing vapours, mist or gas.

Ensure adequate ventilation.

Evacuate personnel to safe areas.

Avoid breathing dust.

For personal protection see section 8.

Environmental precautions:

Prevent further leakage or spillage if safe to do so.

Do not let product enter drains.

Discharge into the environment must be avoided.

Methods and materials for containment and cleaning up:

Pick up and arrange disposal.

Sweep up and shovel.

Keep in suitable, closed containers for disposal.

 

Section 7. Handling and storage
Precautions for safe handling:

Avoid contact with skin and eyes.

Avoid formation of dust and aerosols.

Avoid exposure - obtain special instructions before use.

Provide appropriate exhaust ventilation at places where dust is formed.

Conditions for safe storage, including any incompatibilities:

Store in cool place.

Keep container tightly closed in a dry and well-ventilated place.

 

Section 8. Exposure controls/personal protection
Occupational Exposure limit values: no data available

Biological limit values: no data available

Appropriate engineering controls:

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

Eye/face protection:

Use safety glasses with side-shields, and use equipment for eye protection.

Skin protection:

Wear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.

Respiratory protection:

Wear dust mask when handling large quantities.

Thermal hazards: no data available

 

Section 9. Physical and chemical properties

Physical state: White powder state

Colour: White

Odour: No data available

Melting point: 163°C-165°C(lit.)

Boiling point or initial boiling point and boiling range: 160°C/6mmHg(lit.)

Flammability: No data available

Lower and upper explosion limit / flammability limit: No data available

Flash point: 65°C(lit.)

Auto-ignition temperature: No data available

Decomposition temperature: No data available

PH: No data available

Kinematic viscosity: No data available

Solubility: No data available

Partition coefficient n-octanol/water (log value): No data available

Vapour pressure: 9.06E-16mmHg at 25°C

Density and/or relative density: 1.248g/cm3

Purity: 99.0%Min

Relative vapour density: No data available

Particle characteristics: No data available

 

Section 10. Stability and Reactivity
Reactivity: No data available

Chemical stability: Stable under recommended storage conditions.

Possibility of hazardous reactions: No data available

Conditions to avoid: No data available

Incompatible materials: No data available

Hazardous decomposition products: No data available

 

Section 11. Toxicological Information
Oral: No data available

Inhalation: No data available

Dermal: No data available

Skin corrosion/irritation: No data available

Serious eye damage/irritation: No data available

Respiratory or skin sensitization: No data available

Germ cell mutagenicity: No data available

Carcinogenicity: No data available

Reproductive toxicity: No data available

STOT-single exposure: No data available

STOT-repeated exposure: No data available

Aspiration hazard: No data available

 

Section 12. Ecological Information
Ecotoxicological toxicity: No data available

Biodegradability: No data available

Non-biodegradability: No data available
Bioaccumulation or bioaccumulation: No data available
Other harmful effects: No data available

 

Section 13. Disposal considerations
Product:

The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing.

Do not contaminate water, foodstuffs, feed or seed by storage or disposal.

Do not discharge to sewer systems.

Contaminated packaging:

Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning.

Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill.

Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.

 

Section 14. Transport information

Dangerous goods no. : No data available   

UN No. : No data available

Packaging categories: No data available

Packing mark: No data available

Packing method: : Sealed drums with lining package, to prevent leakage

Transportation matters needing attention: In usual, use sealed OPP bags or aluminum foil bags as package; or use the kraft drums for with film plastic lining package, to prevent leakage.

 

 

Section 15. Regulatory Information
Safety, health and environmental regulations specific for the product in question

Chemical name

Abbreviated name

CAS No.

EINECS No.

Bisphenoxyethanolfluorene

BPEF

117344-32-8

None

European Inventory of Existing Commercial Chemical Substances (EINECS)

Not Listed.

EC Inventory

Not Listed.

United States Toxic Substances Control Act (TSCA) Inventory

Not Listed.

China Catalog of Hazardous chemicals 2015

Not Listed.

New Zealand Inventory of Chemicals (NZIoC)

Not Listed.

Philippines Inventory of Chemicals and Chemical Substances (PICCS)

Not Listed.

Vietnam National Chemical Inventory

Not Listed.

Chinese Chemical Inventory of Existing Chemical Substances (China IECSC)

Not Listed.

 

Section 16. Other Information
Information on revision:

Creation Date: January 20th, 2017

Revision Date: July 21st, 2018